Observations :-
- Observed free-wheeling, change in the time by 10 minutes. Either a problem with the clutch or the shaft of the bevel gears.
- Data was collected from the freewheeling circuit. The data points showed that the circuit went dead after close to 20 minutes of activity. Analysis of the data is pending.
- Data from the pendulum sensors was collected – a lot of junk exists in the data, probably due to some malfunction of the LDR. Analysis of the data is pending.
- FD III side face which has the freewheeling circuit installed was balanced by removing the extra counter weights.
- All face were checked for friction for all hours. The SR face seems to be the problematic one. It requires a lot of force to move from 40 to 45 mins.
- The Gong mechanism was oiled and activated. It seems to be working fine although the sound is less because of just 2 inch travel of the bell hammer.
To-Do List :-
- Need to set up the time period measurement circuit with a new LDR.
- Analysis of two data sets, one from the time period measurement, other from the freewheeling circuit.
- Need to analyze why the freewheeling circuit went dead after 20 minutes of activity. Might be a problem with the batteries or maybe it went dead after the first instance of freewheeling