Aman, Pankaj and Arun went up at 16:00 for about an hour. 

The clock was lagging by 5-10 mins on three faces with each face showing  a different time. The SR (back) face was off by 2 hours. We tried to adjust the time  without removing the bevel assembly but couldn’t as there was a lot of resistance. We will need to come back and correct this.

The following changes were observed:

• The clock chamber floor has been cleaned.
• New tube lights and wiring (along with PVC pipes) for the clock faces. A new plug point as well.
• The lightning conductor window was left open and pigeons have started coming inside the bell chamber.
• 2 broken window glass panes at the room below the bell chamber.